Heads up: some links on this site are affiliate links. If you buy through them, we may earn a commission at no extra cost to you. Brands don't pay for placement, and specs come from manufacturers' own pages. How we make money.
Preview build: affiliate programs not yet joined. Buttons marked "(affiliate link)" currently go straight to the brand's own page.
ReformerFit Finder

How to measure your space for a reformer

Edited by the Fitness Fanatics at Heartzilla · Figures from manufacturers' pages checked 2026-11-18

Ten minutes with a tape measure will tell you more than any product photo. You'll need a tape measure, painter's tape, and a note of your room's quirks.

1. Measure the floor where you'll use it

  • Measure length and width at floor level, wall to wall. Baseboards and heaters can make the floor smaller than the room looks.
  • Note anything that eats into the space: door swings, radiators, furniture you won't move, floor vents.
  • Write the usable rectangle down in feet and inches.

2. Add room for you, not just the machine

Published dimensions cover the machine only. You also need space to get on and off, and for your arms and legs during exercises. Few brands publish guidance. These do:

  • OUBLANC: "at least a 3.5 x 8 ft space," with 7 x 10 ft described as comfortable (RT-101).
  • Peak Pilates: a space plan of 121 x 49 in, with 3 ft clear on every side (casa).

For other brands, decide your own clearance and enter it in the fit tool, which adds it to every side.

3. Tape out the footprint

Mark the machine's published length and width on the floor with painter's tape, then lie down inside it and stretch your arms overhead. Check which width the brand gives. Balanced Body lists the Allegro 2 as 25 in wide for the frame and 31.25 in including the footbar. Use the larger figure.

4. Measure the ceiling, if it matters

Ceiling height matters in three cases:

  • A tower: OUBLANC's RT-101 is 72 in tall open with its tower. Balanced Body says its optional tower adds 61 in above the Allegro 2 frame.
  • Standing exercises on the machine.
  • Storing a machine on its end.

Most brands don't publish an upright-storage ceiling height. Where one is missing, we show "not published."

5. Measure the storage spot and the route

For a folding model:

  • Measure where it will stand when folded.
  • Measure every doorway and turn between the storage spot and the workout spot.
  • Compare those with the folded dimensions. Sunny's folded SF-PM10, for example, is listed at 46.9 in tall.

6. Measure the delivery route

Large reformers ship in big boxes, and the box is often bigger than the folded machine. PersonalHour lists the Janet Elite 2.0's shipping box as 52.6 x 28.3 x 24.8 in and 197.3 lb. Check stairs, elevators and tight corners, and whether the brand offers delivery into your room or only to the curb.

Try the fit tool

The fit tool compares numbers only. It can't see your door swings, outlets or room shape.